LABO-VHZ-I/U/F/C with VHZ-...GA/GK | flow transducer
Product.Nr.: LABO-VHZ-IUFC
Manufacturer: Senseca (ehemals Honsberg)
Product variations
product description
LABO-I/U/F/C: evaluation electronic with analog output
General information:
The VHZ gearwheel flow meter measures the flow according to the volumetric principle, where a pair of gearwheels is moved proportional to the flow rate. The movement of the gearwheels is measured through the closed housing wall by a sensor. The devices are suitable for viscous, fluid, self-lubricating media, as well as for aqueous fluids such as soaps, pasts, emulsions etc. which have a non-abrasive character. Because of the volumetric operation, the devices are almost completely independent of viscosity.
The LABO electronics provide various output signals:
A model with switching output is also available.
If desired, the range end value can be set to the currently existing flow using "teach-in".
Specifications:
General information:
The VHZ gearwheel flow meter measures the flow according to the volumetric principle, where a pair of gearwheels is moved proportional to the flow rate. The movement of the gearwheels is measured through the closed housing wall by a sensor. The devices are suitable for viscous, fluid, self-lubricating media, as well as for aqueous fluids such as soaps, pasts, emulsions etc. which have a non-abrasive character. Because of the volumetric operation, the devices are almost completely independent of viscosity.
The LABO electronics provide various output signals:
- Analog signal 0/4 mA to 20 mA (LABO-VHZ-I)
- Analog signal 0/2 V to 10 V (LABO-VHZ-U)
- Frequency signal (LABO-VHZ-F) or
- Flow signal pulse / x litre (LABO-VHZ-C)
A model with switching output is also available.
If desired, the range end value can be set to the currently existing flow using "teach-in".
- Volumetric flow measurement
- Almost no influence by different viscosities
- 0...10 V, 4...20 mA , frequency and pulse output completely configurable
- Robust construction
- Compact design design
Specifications:
| Appliance: | flow, measurement, control, optionally: indication |
| Medium: | water, oil |
| Total measuring range: | 0.02 l/min to 150 l/min H2O or oil |
| Connection: | G 1/4 to G 1 internal thread, aluminium or stainless steel |
| Basic data: | PN 100 bar to 200 bar, temperature of medium -25°C to +80°C, optionally -25°C to +120°C |
| Electrical data: | supply voltage 10 V DC to 30 V DC, at voltage output 10 V: 15 V DC to 30 V DC power consumption <1 W (for no-load output) |
Downloads
data sheet English (1.42 MB)
data sheet German (2.42 MB)
