product description
General information:
The tapping clamps described below can be used for installation of impeller probes of the series RR.-032 in industrial PVC-U pipeline systems. Of course, they are also suitable for installation in pipeline systems made of other materials having the same outer diameters. They offer the advantage that they can be retrofitted without having
to cut the pipeline or carry out welding work.
A bore hole diameter of only 38 mm is required. The nozzle of the tapping clamp immerses into this bore hole. The (curved) surface around the bore hole must be of such a kind that the sealing is guaranteed by the O-ring affixed in the clamp.
The installation of the impeller probe in the clamp takes place with the clamping ring with union nut supplied with the probe. The installation point should be chosen such that an uninterrupted (no valves, bends, edges, etc.) inlet and outlet section with a length of at least 10 times the inner diameter of the pipe is provided
upstream and downstream from the probe.
Specifications:
| Materials in contact with medium: |
probe mount: PVC-U
clamp: polypropylene
seal: FKM |
| Pressure reistance: |
PN10 |
