OMNI-RRI-... with RRI-... | flow transducer/switch
Product.Nr.: OMNI-RRI
Manufacturer: Senseca (ehemals Honsberg)
Product variations
product description
OMNI: evaluation electronic with analog output, switching function and display
General information:
The flow meter consists of an impeller which is set into rotation by the flowing medium. The rotor's rotational speed is proportional to the flow volume per time unit. The rotor is fitted with stainless steel clamps (optionally titanium). An inductive proximity switch records the rotational speed.
The OMNI transmitter on the sensor has a graphical, backlit LCD display which is clearly readable, both in the dark and in bright sunlight. The graphics display allows the indication of measured values and parameters in a clearly understandable form. The measured values are displayed with 4 digits, together with their physical unit which may also be modified by the user.
The electronics have an analog output (4 mA to 20 mA or 0 V to 10 V) and two switching outputs, which can be used as limit switches for minimum or maximum monitoring or as two-point controllers.
The switching outputs are designed as a push-pull drivers, and therefore can be used both as PNP or NPN outputs. The exceeding of limit values is signalled by a red LED which is visible over long distances and by a cleartext message on the display.
The housing made of stainless steel has a hardened, scratchproof mineral glass pane. It is operated via a programming ing ring that is fitted with a magnet. Therefore housing cutouts for the purpose of operating elements are not necessary and the tightness of the housing is permanently ensured.
By turning the ring to right or left, you may modify the parameters (e.g. switching point, hysteresis...). To protect from unintended programming, it can be taken off, turned by 180° and replaced afterwards, or it can be removed completely, thus acting as a key.
Specifications:
General information:
The flow meter consists of an impeller which is set into rotation by the flowing medium. The rotor's rotational speed is proportional to the flow volume per time unit. The rotor is fitted with stainless steel clamps (optionally titanium). An inductive proximity switch records the rotational speed.
The OMNI transmitter on the sensor has a graphical, backlit LCD display which is clearly readable, both in the dark and in bright sunlight. The graphics display allows the indication of measured values and parameters in a clearly understandable form. The measured values are displayed with 4 digits, together with their physical unit which may also be modified by the user.
The electronics have an analog output (4 mA to 20 mA or 0 V to 10 V) and two switching outputs, which can be used as limit switches for minimum or maximum monitoring or as two-point controllers.
The switching outputs are designed as a push-pull drivers, and therefore can be used both as PNP or NPN outputs. The exceeding of limit values is signalled by a red LED which is visible over long distances and by a cleartext message on the display.
The housing made of stainless steel has a hardened, scratchproof mineral glass pane. It is operated via a programming ing ring that is fitted with a magnet. Therefore housing cutouts for the purpose of operating elements are not necessary and the tightness of the housing is permanently ensured.
By turning the ring to right or left, you may modify the parameters (e.g. switching point, hysteresis...). To protect from unintended programming, it can be taken off, turned by 180° and replaced afterwards, or it can be removed completely, thus acting as a key.
- Uncomplicated measurement of flow rates
- No magnets, uses inductive sensor
- Long working life due to high quality ceramic axis and special plastic bearing
- Run-in and run-out sections are not necessary
- Modular construction with various connection systems
- Connections are pluggable and rotatable
- Analog output 4 mA to 20 mA or 0 V to 10 V
- Two programmable switches
- Graphical LCD display, backlit, can be read in sunlight and in the dark
- Selectable units on the display
- Programmable parameters via rotatable, removable ring (programming protection)
- Electronic housing with scratchproof, chemically resistant glass
- Rotatable electronic housing for best reading position
- Designed for industrial use
- Small, compact construction
- Simple installation
- Optional: non-return valve, filter, constant flow rate device in the connections
Specifications:
| Appliance: | flow, measurement, control, indication |
| Medium: | water (oil and air/gases upon request) |
| Total measuring range: | 0.1 l/min to 100 l/min H2O |
| Connection: | DN 10 or DN 25 internal/external thread or hose nozzle, PVDF |
| Basic data: | PN 16 bar, temperature of medium 0°C to +60°C |
Downloads
data sheet German (1.03 MB)
data sheet English (1.18 MB)
