FLEX-RRH-... with RRH-... | flow transducer/switch
Product.Nr.: FLEX-RRH
Manufacturer: Senseca (ehemals Honsberg)
Product variations
product description
FLEX: evaluation electronic with analog output and switching function
General information:
The flow meter consists of an impeller which is set into rotation by the flowing medium. The rotor's rotational speed is proportional to the flow volume per time unit. The rotor is fitted with magnets. A Hall sensor records the rotational speed.
The FLEX transmitter on the sensor has one analog output (4 mA to 20 mA or 0 V to 10 V) and one switching output, which can be configured as a limit switch for minimum or maximum monitoring, or as a frequency output.
The switching output is designed as a push-pull driver, and therefore can be used both as a PNP or an NPN output. The state of the switching output is signalled by a yellow LED in the connector outlet; the LED has all-round visibility.
The sensor is configured in the factory. Alternatively this can be done with the help of the optionally available ECI-1 device configurator (USB interface for PC). A selectable parameter can be modified on the device, with the help of the magnet clip provided. In this case, the current measured value is saved as the parameter value. Examples of parameters are switching value or the measuring range end value.
The stainless steel housing of the electronics is rotatable. Therefore it is possible to align the cable outlet after installation.
Specifications:
General information:
The flow meter consists of an impeller which is set into rotation by the flowing medium. The rotor's rotational speed is proportional to the flow volume per time unit. The rotor is fitted with magnets. A Hall sensor records the rotational speed.
The FLEX transmitter on the sensor has one analog output (4 mA to 20 mA or 0 V to 10 V) and one switching output, which can be configured as a limit switch for minimum or maximum monitoring, or as a frequency output.
The switching output is designed as a push-pull driver, and therefore can be used both as a PNP or an NPN output. The state of the switching output is signalled by a yellow LED in the connector outlet; the LED has all-round visibility.
The sensor is configured in the factory. Alternatively this can be done with the help of the optionally available ECI-1 device configurator (USB interface for PC). A selectable parameter can be modified on the device, with the help of the magnet clip provided. In this case, the current measured value is saved as the parameter value. Examples of parameters are switching value or the measuring range end value.
The stainless steel housing of the electronics is rotatable. Therefore it is possible to align the cable outlet after installation.
- Uncomplicated measurement of flow rates
- Metal housing with Hall sensor
- Working pressure up to 100 bar
- Long working life due to high quality ceramic axis and special plastic bearing
- Run-in and run-out sections are not necessary
- Modular construction with various connection systems
- Connections are pluggable and rotatable
- Analog output and switching output
- Designed for industrial use
- Small, compact construction
- Simple installation
- Simple operation
- Cable outlet continuously rotatable
- Optional: non-return valve, filter, constant flow rate device in the connections
Specifications:
| Appliance: | flow, measurement, control |
| Medium: | water (oil and air/gases upon request) |
| Total measuring range: | 0.1 l/min to 100 l/min H2O |
| Connection: | DN 10 or DN 25 internal/external thread or hose nozzle, CW614N nickel-plated or 1.4305 |
| Basic data: | PN 100 bar, temperature of medium 0°C to +70°C |
Downloads
data sheet German (1.56 MB)
data sheet English (2.02 MB)
