US2-...HH/VM | flow switch
Product.Nr.: US2-...HH/VM
Manufacturer: Senseca (ehemals Honsberg)
EUR 70,60
incl. 19 % VAT
product description
The paddle flow controller in plastic design has a titanium axis which assures a
low-friction bearing. The paddle follows the flow rate against the force of two magnets
acting as springs. The paddle magnet also activates a reed contact positioned outside the flow chamber.
The paddle is available in two standard lengths. Each paddle can also be shortened at a predetermined breaking point..
- Highly reproducible
- Low pressure loss
- Hermetic separation between electrical and hydraulic component
| Switch: | reed switch |
| Nominal width: | DN 25 to 80 |
| Process connection: | union nut G 3/4 |
| Switching point H2O: | 3 l/min to 62 l/min |
| Qmax: | up to 600 l/min |
| Tolerance: | ±15 % |
| Pressure resistance: | PN 10 bar |
| Temperature of medium: | -20°C to +85°C |
| Ambient temperature: | -20°C to +70°C |
| Media: | water, oils |
| Wiring: | normally open (n.o.) no. 0.372 |
| Switching voltage: | max. 240 V AC / 46 V DC |
| Switching capacity: | 100 VA / W |
| Protection class: | 2 |
| Switching current: | max. 1 A |
| Ingress protection: | IP 65 |
| Cable: | 0.5 m (optional 1 m / 2 m / 3 m) |
| Materials in contact with medium: | Noryl (PPO), titanium, barium ferrite, Ms58 (with version VM) |
| Materials not in contact with medium: |
Noryl, seal EPDM |
| Installation location: | Installation location influences the adjustment range! The installation position with a flow from top to bottom is not permitted. |
| Dimensions: | Ø 34 x 127 mm (US2-025-...), Ø 34 x 150 mm (US2-050-...) |
| Weight: | approx. 50 g (-HH), approx. 105 g (-VM) |
Downloads
data sheet German (0.84 MB)
data sheet English (1.16 MB)